NOTICE OF PURCHASING PLAN
FOR INSULATION MATERIAL 2019
Date: 24 June 2019
Subject: INSULATION MATERIAL 2019
Ref. No.: 097/2019/NSRP-PS
Nghi Son Refinery & Petrochemical Limited Liability Company (NSRP) is planning for purchasing of a package for “Insulation Material 2019” in order to select a suitable contractor for provision of the Goods& Services for NSRP. The tentative date of commencement of the Goods and services will be in early July 2018
NSRP plans to start the above mentioned purchasing process very soon. If your company is interested in this purchasing package, please respond to all questions in the questionnaire attached in Attachment 01 and send to the following email address by 5.00 PM (Hanoi time) 1 July 2019.
Attention : Mr. Ho Khai Hoan – Procurement Section
Email address : email@example.com ;
Cc : firstname.lastname@example.org
Please put “Insulation Material 2019” in the subject of your cover email.
Should you have any question, please contact us at email@example.com and copying firstname.lastname@example.org for further information.
For the avoidance of doubt, this notice does not constitute any contractual offer, binding promise or guarantee of business by NSRP. Neither shall your satisfaction of all the minimum requirements mentioned above nor your response to this notice creates any promise or guarantee by NSRP that you will be invited to participate in the above mentioned purchasing process.
Please answer the questions below:
QUESTIONNAIRE TO FORM SUPPLIER LIST
Do you have strong and clear intention to provide Insulation Material with specification (as stated in SOW) to NSRP?
Does your company hold registration for Insulation and Material Supplying?
Please provide registration certificate of your company.
Please provide full name, correspondence and registered address of your company.
Do you have experience to provide at least 02 similar contracts before?
Please provide your complete experience list for similar contract
Are your Manufacturer to offer Warranty Policy or the authorized distributor from Manufacturer to offer Warranty Policy same as from Manufacturer?
|No||Insulation type||Insulation Material||Insulation specification||Size||Length (m)||Width (m)||Unit||Quantity shall be ordered|
|1||Hot Insulation||Ceramic fiber blanket 25mm||Classification temperature °C :1260; Tensile strength ( kgf/m2 )
(ENV 1094-7); Linear shrinkage % – 24 hrs
Max (ENV 1094-7) :3.0(1200°C); Densities kg/m3 :128;Thermal conductivity (w/mk)
follow ASTM C 201.
|2||Cold Insulation||Preformed Pipe Section 30Inch 50mm||“Polyisocyanurate” (PIR) Material physical specification should follow as herein:
Density: 40kg/m2 min.
Closed Cell Content: 90% min
Water Vapour Permanence at 23°C & 50% RH: 0.8 g /(m².h )
Flame Spread Class 1 to BS476 Part 7: Less than 25, ASTM E84, BS 476. Pt. 7, Class 1
Coefficient of Linear Thermal Expansion and Contraction: At 23ºC 70X10-6 m/(m.K) max At -165ºC 50X10-6 m/(m.K) max
Temperature Service from -180oC to 120oC
Compressive strength minimum value of all directions: 0.2MPa. min.
Tensile strength minimum value of all directions: 0.3MPa. min.
Leachable halide content: 60 ppm max.
Thermal Conductivity @ 20°C mean temp:
Freshly blown foam (within 3 weeks of production): 0.020 w/mK max.
Aged at 21ºC for 180 days (sample cut on both sides): 0.023 w/mK max.
|3||Weather Jacketing Cover||Aluminium Sheet, thickness 0.8mm|| Aluminium jacketing shall be flat mill finished commercial grade of alloy AL-Mn which shall comply with BS 1470 or ASTM B209 under the following material designations:
ASTM B209 Alloy 1050-H14
|4||Aluminium Sheet, thickness 1mm||1.0tx1200||–||1.2m||m2||2,000|
|5||Stainless Steel plate, thickness 0.8mm||SS304||0.8mmx1200mm||–||1.2m||kg||500|
|6||Secure banding materiral||Stainless steel tie wire||SS304||1.2mm, Dia||–||–||kg||200|
|7||Stainless steel banding||0.5mm thick x12mm Width||–||12mm||kg||300|
|8||Stainless steel banded clip||0.5mm thickx12mm||–||12mm||Pcs||5,000|
|9||Anciliary Material||Screw||Tapping Screws required for metal jacket fabrication shall be stainless steel Phillipped pan head self tapping type A No. 8 dia. x 12mm long equivalent to 4.2 x 12mm long to BS 4174 complete with neoprene washers under the head or an approved equivalent.||4.2mm x 12-13mm length||–||–||Pcs||100,000|
|10||Metal sealant||Apollo Silicone Sealant A500
or Foster 95-44 Elastolar Sealant
|300- / tube||–||–||Tube||5000|
|11||Heat transfer cement||TIC 9061 / SHC106-00/ AMETEK Controltrace Grade B||Bucket(18.9L)/
|12||Lap adhesive||SHC 107-75||Bucket/ 18.9L||–||–||Bucket||5|
|13||Joint sealant||SHC 105-01||Bucket/ 18.9L||–||–||Bucket||5|